DS-K5604A-3XF/V
• Plug & play: Supports rapid deployment. Free of wiring, installation, or configuration.
• Supports Vanadium Oxide uncooled sensor to measure target's temperature
• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C without black body calibration
• Recognition distance: 0.3 to 2 m
• Fast temperature measurement mode: Detects face and takes body temperature without identity authentication
• Multiple authentication modes with temperature measure are available
• Face mask wearing alert
• If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the
authentication or attendance is valid.
• Forced mask wearing alert
If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the
authentication or attendance will be failed.
• Displays temperature measurement results on the authentication page
• Triggers voice prompt when detecting fever
• Configurable door status (open/close) when detecting fever
• Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data
on the client software
• Integrated design with stand bracket
• Communicates with the third-party turnstile via IO output or Wiegand
• Adjustable supplement light brightness
• High performance processor with deep learning algorithm
• 50,000 face capacity, 100,000 event capacity
• Face recognition duration ≤ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Transmits and saves the comparison results and the captured pictures to the client software or others
• NTP, manually time synchronization, and auto synchronization
• Watchdog design for protecting the device and ensuring device running properly
• Audio prompt for authentication result
* Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security
level, use multiple authentication modes
• Supports Vanadium Oxide uncooled sensor to measure target's temperature
• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C without black body calibration
• Recognition distance: 0.3 to 2 m
• Fast temperature measurement mode: Detects face and takes body temperature without identity authentication
• Multiple authentication modes with temperature measure are available
• Face mask wearing alert
• If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the
authentication or attendance is valid.
• Forced mask wearing alert
If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the
authentication or attendance will be failed.
• Displays temperature measurement results on the authentication page
• Triggers voice prompt when detecting fever
• Configurable door status (open/close) when detecting fever
• Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data
on the client software
• Integrated design with stand bracket
• Communicates with the third-party turnstile via IO output or Wiegand
• Adjustable supplement light brightness
• High performance processor with deep learning algorithm
• 50,000 face capacity, 100,000 event capacity
• Face recognition duration ≤ 0.2 s/User; face recognition accuracy rate ≥ 99%
• Transmits and saves the comparison results and the captured pictures to the client software or others
• NTP, manually time synchronization, and auto synchronization
• Watchdog design for protecting the device and ensuring device running properly
• Audio prompt for authentication result
* Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security
level, use multiple authentication modes